卧鹿玻璃饰品 - 美国大都会艺术博物馆展品查阅

品名（中）	卧鹿玻璃饰品
品名（英）	Glass ornaments with recumbent deer
入馆年号	1922年，22.139.79
策展部门	希腊和罗马艺术（Greek and Roman Art）
创作者
创作年份	公元前 1370 - 公元前 1200
创作地区
分类	玻璃（Glass）
尺寸	高: 2 5/8 x 3/4 x 1/8 英寸 (6.7 x 1.9 x 0.3 厘米)
介绍（中）	一套十九个匹配的珠子或贴花，都是用相同或非常相似的模具制作的半透明的淡蓝绿色薄的垂直矩形面板；背部不平；直边和底边；一个洞靠近鹿背上方的顶部，两个洞在靠近底部的凹陷圆圈中，一个洞水平穿过面板。一个只有面板下半部分的碎片在顶部断裂边缘附近有两个洞正面的模压装饰：顶部是风格化的卧鹿，长耳朵，鼻子向前突出，高浮雕；在中间，卷轴在顶部，有六个垂直的肋在浮雕中，肋向下延伸；在卷轴的正确右边缘，有一个向上倾斜的突出的钉子，上面有一个水平的孔；底部，短截面，上下两侧有一条狭窄的水平带，带上饰有精细的垂直肋，包含一个带两个孔的平面凹进圆圈，两侧有两个垂直排列的浮雕设计，类似于倒置的心形（圆圈左侧的浮雕，轮廓不太清晰，包含突出的小尖刺）。这些洞的组合表明，这些元素不仅被串在一起，而且在顶部和底部都连接在一个背衬上四颗珠子完好无损，三颗破碎但完整，其余的都是零碎的；暗淡和乳褐色风化。
介绍（英）	Set of nineteen matching beads or appliqués, all made in same or very similar molds. Semi-translucent pale blue green. Thin, vertical rectangular panel; uneven flat back; straight sides and bottom edge; one hole near top above back of deer, two holes in recessed circle near bottom, and one hole running horizontally through panel. One fragment with only the lower half of panel has two holes near top broken edge. Molded decoration on front: at top, stylized recumbent deer with long ears and snout projecting forward in high relief; at middle, reel at top with six vertical ribs in relief, ribs extending down body; on proper right edge of reel a projecting spike, slanting upwards, with horizontal hole immediately above it; at bottom, short section, flanked above and below by a narrow horizontal band decorated with fine vertical ribs, containing a plain recessed circle with two holes, flanked to either side by two relief designs arranged vertically and resembling inverted heart shapes (those to left of circle, less well-defined and containing small projecting spikes). The combination of holes suggests that the elements were not only strung together but also attached at the top and bottom to a backing. Four beads are intact, three are broken but complete, and the rest are fragmentary; dulling and creamy brown weathering.